OPERATION
21
−
Call transfer is also automatically performed if the programmed call forward
number is less than five digits.
−
Call transfer is also performed when the destination number dialed during
call back or call bridge is less than five digits.
CALL BRIDGE
During call bridge, the first leg of the call (from your location to DialMate) will be
charged to the phone where you are, but the second leg (from DialMate to the
called number) will be charged to DialMate’s location. For instance, call bridge
allows you to make a local call to DialMate (from a pay phone or office phone) and
then use your home line to make long distance calls.
Normal Call Bridge
STEPS USER
DIALMATE
call DialMate from anywhere and after
hearing 3 rings, hang up immediately
detects 3 rings
wait at least 7 seconds (but not more than
two minutes) and call DialMate again
answers
on
the 3
rd
ring
wait for one beep
enter your PIN (e.g., “1234”) within 3
seconds or else DialMate will hang up; it will
disconnect immediately if the wrong PIN is
entered
IJKL
wait for two beeps
enter “
I
”
I
wait for two beeps
Dial the destination number (e.g., “831-
4444”) followed by a “
;
” (up to 30 digits).
Enter “*” before destination number to skip
prefix.
^KILL
LL;
stores the dialed
digits, flash
hooks, dials
prefix (if any)
and the number,
flash hooks
again, dials
suffix (if any)
and connects
the call
to terminate the call, enter “
;H
” before
hanging up
;H
disconnects the
call and goes to
idle mode