SETUP FOR NORMAL USE
11
V. SETUP FOR NORMAL USE
CHECK YOUR EQUIPMENT
AC-DC power adapter
DialMate unit
Modular telephone cord (included)
Dual Jack adapter (included)
Tone capable telephone line with 3-Way/Transfer Calling (ordered from your
phone company or VOIP service provider)
Analog telephone with modular telephone cord (user supplied)
The telephone line must have tone and conference/transfer calling capabilities.
DialMate will not work on pulse dialing systems
.
MAKE THE CONNNECTIONS
Fig. 2 Connection diagram for normal use.
After on-site programming, disconnect the telephone cord from DialMate’s “Phone”
jack. Disconnect DialMate’s “Line In” cord from the wall jack/PABX extension.
Connect the supplied dual jack adapter into the wall jack or VOIP ATA (see Fig. 2).
Connect DialMate’s “Line In” cord and the telephone cord into the dual jack
adapter. Keep DialMate’s AC-DC adapter plugged in. If you want to connect a
telephone to the same line, plug the phone cord from the telephone set into the
vacant port on the dual jack adapter. This is the equipment configuration for
normal use.