-21-
Model W1805 (For Machines Mfd. Since 7/15)
O
PE
R
ATIO
NS
3.
Slide the clamp mounting bracket so the clamps
provide enough room to move workpieces in and out.
.
Note:.
Use a ruler to make sure that both sides are
adjusted equally; otherwise, contact area of the
clamp faces will not be uniform, which could result
in the workpieces slipping during operation.
4..
Tighten the hex nuts against the clamp brackets to
hold them in place.
Changing.Template.Sizes
The template bar (
Figure.19
) has a different size dovetail
template on each of the four sides. The size of each
template is stamped into that side. The active template
size is always the side that is facing down. A tracer pin
connected to the headstock guides the cutter along the
template profile when cutting.
The template works in tandem with the
indicator plate
and the
fixed chaser
.
Indicator.Plate:
Since the template bar is underneath the
cutting area and away from immediate operator view, the
top edge of the indicator plate mirrors the position of the
tracer pin along the template bar to help the operator
when cutting.
Each indicator plate has two patterns. When mounted, the
top edge of the indicator plate must match the current
side of the template bar that is being used. Whenever
changing the template bar size, the indicator plate must
also be changed. Use the two mounting cap screws to
remove and change the indicator plate (see
Figure.20
).
Fixed.Chaser:
The fixed chaser supports the vertical
workpiece, yet allows the cutter to cut the bottom of the
vertical workpiece without hitting the metal fixed chaser.
To prevent the cutter from contacting the fixed chaser,
use the fixed chaser that corresponds to the template size
shown in
Figure.21
.
Figure.19.
Template bar.
Template Bar
1" and 2"
Indicator Plate
1
1
⁄
2
" and 2
1
⁄
2
"
Indicator Plate
Mounting
Cap Screws
Figure.20.
Indicator plate installation.
Template.Bar.Size
Use.Fixed.Chaser.
Size
1"
2"
1
1
⁄
2
"
3"
2"
2"
2
1
⁄
2
"
2
1
⁄
2
"
Measuring Fixed Chaser Size
Figure.21.
Determining correct fixed
chaser.
Continued on next page
Содержание Shop Fox W1805
Страница 48: ......
