7
Operating instructions
GB
Indication lights
1. Humidity Display Screen
The led indicator has two functions:
1.When the dehumidifier is connected to a power source it shows indoor humidity
2.When you set the humidity, the display shows the set humidity, 88 twinkling.
After settings are finished, the display returns to show indoor humidity.
2. Power Indicator Light
This light indicates that the unit is properly powered on and ready to operate.
Always make sure the unit is “off” prior to performing any service.
3. Continuous Working Light
When this light illuminates green, it indicates that the dehumidifier is set to continuous operation mode.
When the light glows red, it means the unit is in auto defrost mode and clearing the evaporatior coil of
any ice buildup.
4. Compressor Light
When the compressor light glows red, it indicates the compressor has been initiated but is currently
warming up.
Once the compressor light switches to green, it indicates the compressor is in working status.
5. Unit indicator light
When the unit indicator light is red, it illustrates the dehumidifier is in unit mode.
While in unit mode, the dehumidifier will use it´s built-in humidity sensor. If using a remote control,
unit mode will allow you to remotely monitor the room conditions where the dehumidifier is located.
6. Remote Indicator Light
When the remote indicator light is red, it illustrates the unit is remote mode.
While in remote mode, the dehumidifier will use the sensor on the remote control unit. In this mode,
the inlet and outlet of the dehumidifier can be ducted.
NOTE :
If the supply cord is damaged, it
must be replaced by the manufacturer,
its service agent or similarly qualified
persons in order to avoid hazard.
Power
Cont.
Defrost
Comp
Unit
