Operating instructions
GB
MAINTENANCE
Clean machine body
Use a soft, moist cloth to clean the machine body
Filter mesh clean
1.Dissemble the filter mesh
2. Clean the filter mesh. Adopt cleaner to adsorb the surface dust of filter mesh. If the filter mesh is very dirty,
please use warm water or soft solvent to clean it. Let it dry fully before reinserting it.
3. Reinstall the filter
WARNING
1.To prevent injury from the fan fins, do not open the filter when the machine is running. Use a screwdriver to
remove the filter.
2. If the filter frame on the back of the unit is dirty, loosen in by rotating the frame. Clean the frame in water.
Avoid using strong cleaners or solvents as this may damage the frame.
DEHUMIDIFIER STORAGE
If the product isn’t used for a long time, please store it according to the following steps:
1.When the unit is switched on, press the drain key to drain the water. Wait a few minutes
and repeat until all water is emptied.
2. Collect and bundle the power cord
3. Clean the filter mesh
4. Store in a clean and dry environment.
NOTE :
Always disconnect the cord
before cleaning.
IMPORTANT :
Wood’s dehumidifiers must be connected
to an earthed power source.
WHEN THE DEHUMIDIFIER REQUIES SERVICING
If the dehumidifier requires servicing, you must first contact the retailer.
Proof of purchase is required for all warranty claims.
