Wood’s DSC-70E, Руководство пользователя

Страница: 7 / 14

Operating instructions
GB
TROUBLE SHOOTING
If you are having trouble with your dehumidifier, please refer to below trouble shooting
Trouble Cause Solution
Machine doesn’t work
Power cord isn’t connected
Connect the unit to a power source
Room temperature over 35°C or
below 0°C
Increase or decrease the
temperature
Cannot start on the dehumidifier Filter mesh jammed?
Clean the filter mesh according to
the manual
Air inlet or outlet jammed? Clear the blockage from air inlet or
air outlet
No air inlet Filter mesh jammed? Clean the filter mesh according to
the manual
Unormal noise Is the machine inclined? Move to flat and firm ground
Filter mesh jammed? Clean the filter mesh
Trouble code
:
E1 When LED shows E1
,
there is hu-
midity sensor trouble or humidity
sensor connection wire isn’t fixed
.
Change the humidity sensor or
check the connection wire
.
Trouble code
:
E2 When the LED shows E2 for
a
longer period
,
there is a problem
with the water pump
.
Change or repair the water pump
Trouble code
:
LED flashing When the LED is flashing in red
,
there is temperature sensor trou-
ble or connection wire isn’t fixed
.
Change the temperature sensor or
check the connection wire
.
Max. working area 280 m²
Recommended working area 10-190 m²
Air flow 450 m³/h
Capacity at 10ºC & 60% RH 10 litres
Capacity at 20ºC & 70% RH 26 litres
Capacity at 35ºC & 80% RH 75 litres
Power at 10°C & 60% RH 390W
Power at 20°C & 70% RH 500W
Power at 35ºC & 80% RH 830 W
Working interval temperature +0 to +35ºC
Fan speeds 1
Dims LxWxH 620x410x480 mm
Weight 35,5 kg
Cooling media, freon free R410A
IP rating IP22 (X2)
Technical data