Woodley Clinispin HORIZON 12 Flex, Руководство оператора

Страница: 8 / 16

Woodley Equipment Company – + 44 (0) 1204 669033 – sales@woodleyequipment.com| Page 5
C
YCLE
L
OCK
To ensure repeatability, the centrifuge can be locked either on one cycle (Single Cycle Lock) or restricted to the saved
cycles (Presets Lock). The Single Cycle Lock also prevents making changes to the selected cycle parameters.
The Preset Lock allows selection of any saved cycle and prevents changing the parameters of saved cycles.
S
INGLE
C
YCLE
L
OCK
Lock on Single Cycle
Select desired cycle. With lid open, press and hold the UNLOCK
button for 5 seconds. Two beeps and a flash of the lid light will
confirm that cycle selection is locked.
Cancel Single Cycle
Lock
To re-enable cycle selection, with lid open, press and hold the
UNLOCK button for 5 seconds. Two beeps and a flash of the lid
light will confirm that cycle selection is now unlocked.
P
RESET
L
OCK
Enter Settings
Mode
Press the GEAR button.
Lock Saved Cycles
With lid open, press and hold the UNLOCK button for 5 seconds.
Two beeps and a flash of the lid light will confirm that the Preset
Lock is active. The cycle screen will now only show the numbers
for programmed cycles.
Cancel Preset Lock
With lid open and while not in Settings mode, press and hold the
UNLOCK button for 5 seconds until two beeps are heard. Saved
cycles can again be edited or programmed.