![Woodfire Passiv Скачать руководство пользователя страница 4](http://html.mh-extra.com/html/woodfire/passiv/passiv_operation-and-installation-manual_994875004.webp)
2. Delivery
As soon as it is delivered, the stove must be carefully inspected and any damage must be
noted on the delivery note. Afterwards the damage must be reported immediately to the
the retailer.
When transporting the stove you must ensure that only safe, strong and approved carrying
methods are used. The stove may only be moved in a stable, standing position or slightly
inclined on a sack truck. A sack truck should only be used against the back of the stove.
All parts of the stove must be protected against damage, moisture and rain, or other types
of contamination during transport and installation.
3. Disposal of packaging
The packaging protects the stove from damage during transportation. Any cardboard
packaging materials can be recycled. The wooden parts of the packaging are untreated
and can be used as firewood.
4.
Handling
The Woodfire Passiv is an insulated boiler stove and has a thin outer skin to protect and
retain the insulation. Care must be taken not to damage this outer skin.
The stove should never be moved by pushing or lifting by that outer skin.
Before removing the stove from the pallet and commencing installation, it is recommended
that the fire bricks and the front plinth are removed from the stove. The front plinth can be
removed by opening the combustion chamber door, and removing the two screws holding
it in place.
The stove is supplied with a spigot lift kit. Place the
lower metal bar down through the flue spigot so that the
two ends bear on either side below the spigot. The
upper metal bar rests on the top of the spigot. Make
sure that the adjustable flue damper is not fouled by the
lifting rope. Feed a suitable lifting pole though the strap,
looping the rope around the pole until the correct length
is achieved. The rope is at the correct length when, with
the pole on their shoulders and the rope taut, the knees
of the people lifting it are slightly bent. The stove can
now be raised off the pallet by straightening their legs
and then moved to position.
4
Содержание Passiv
Страница 1: ...OPERATION AND INSTALLATION MANUAL WOODFIRE Passiv ...
Страница 28: ...19 Product Fiche 28 ...
Страница 29: ...20 Energy Label 29 ...