background image

-4-

-The working area around the machine must be kept always clean and clear, in order to have an immediate and easy 

access to the switchboard.

-Never insert materials which are different from those which are prescribed for the machine utilization.

-Never process pieces which may be too small or too wide to the machine capacity.

-Do not process wood which has evident defects(cracks, knots, metal parts, etc)

-Keep hands clear from the tool; feed the piece with the aid of a pusher.

-Keep the tools tidy and far away from those not authorized persons.

-Use qualified tools, never use cracked, buckled or wrong polished tools; never use irregular, dull tools; never use 

distorted blade.

-Never use the tools beyond the speed limit recommended by the producer.

-Always wear gauntlets when handling the tools.

-Mount the tools in the right machining direction.

-Never start the machine before having correctly installed all protections. Without protections or damage caused by 

person should install and complete in time, or forbid to start machine. Never install protections.

-Connect the dust suction hoods to and adequate suction system; suction must always be activated when the machine 

is switched on.

-Never open the door or other protections when the machine or the system is operating.

-Before start machine, check if the blade is properly assembled. After starting machine, check if turning direction of 

bladeis right, start to work after revolving speed is stable.

-Many unpleasant experiences have shown that anybody may wear objects which could cause serious accidents. 

Therefore, before starting working, take any bracelet, watch or ring off.

-Button the working garment sleeve well around the wrists.

-Take any garment off which, by hanging out, may get tangled in the MOVING UNITS.

-Always wear strong working footwear, as prescribed by the accident-prevention regulations o all countries.

-Use protection glasses. Use appropriate hearing protection systems (headsets,earplugs,etc.) and dust protection 

masks.

-Never let unauthorized people repair, service or operate the machine.

-Any transport, assembly and dismantling is to be made only by trained staff, who shall have specific skill for the 

specified operation.

-The operator must never leave the machine unattended during operation.

-During any working cycle break, switch the machine off.

-In case of long working cycle breaks, disconnect the general power supply.

-When breakdown happen, please switch the machine off and pull up power line, seek help from professional person. If 

wood material block machine, please backward material.

-Clean offcut, saw dust timely during operation.

-Keep ground around machine clear, no stack flammable and combustible materials.

Содержание HB350A












Отзывы: