SETUP & OPERATION
Loading, Turning, And Clamping Logs
SETUP & OPERATION
25doc092506
2-13
2
1.
Use the log turner to rotate the log on the sawmill bed.
2.
Spin the log against the side supports until it is turned the way you want it for the first cut.
If you want to turn the log more, do the following steps.
3.
Raise the turner arm to get a new bite on the log.
4.
Disengage the clamp.
5.
The log can be turned now. Repeat steps 4 through 7 until the log is turned as desired.
To Clamp Logs:
1.
Position the clamp against the log.
2.
Move the clamp down far enough so that it is below your first few cuts. Using the clamp
lever, clamp the log against the side supports.