Maintenance
3
3-1
LMS99doc032619
Maintenance
SECTION 3 MAINTENANCE
DANGER!
On electric mills, hazardous voltage inside the
disconnect box, starter box, and at the electric motor can
cause shock, burns, or death. Disconnect and lock out
power supply before performing service! Follow all applica-
ble electrical codes.
DANGER!
Make sure all electrical installation, service
and/or maintenance work is performed by a qualified elec-
trician and is in accordance with applicable electrical codes.
Failure to do so will result in serious injury or death.
DANGER!
Before performing any service to this equip-
ment, turn the key to the OFF position, remove the key, and
disconnect the battery ground terminal. Failure to do so will
result in serious injury or death.
1.
Clean the lube filter as needed.
See Figure 3-1.
To clean,
Make sure the lube control is in the OFF position and the lube bottle valve is closed
all the way.
Unscrew the filter reservoir and flush with water.
Remove the cylindrical mesh filter and gently flush with water.
