manualshive.com logo in svg

Wood-mizer KD150 Series, Руководство пользователя

Поделиться
Скачать
Wood-mizer KD150 Series Скачать руководство пользователя страница 38

32

• Fresh cut lumber drys better and is less likely to be

damaged during the drying process. Try to get it in 

the kiln as soon as possible.

• If you can’t dry your lumber immediately after its

been cut make sure that it is stacked, stickered and 

stored in a clean, dry place. Monitor it until it is ready 

to be put in the kiln as its moisture content will 

change during this time. 

• Carefully plan your drying schedules for every

batch of lumber and follow through with them, only 

making alterations when necessary. Neglecting an 

effective schedule can ruin product and cost you 

money. 

• Air flowing through the lumber will be removing

the moisture. Make sure you take the time to 

properly sticker and stack your lumber in the kiln. 

Better airflow will result in better drying.

• Use baffles and deflectors to control airflow inside

the kiln when drying, it will be more efficient and 

result in more evenly dried lumber. 

• Keep detailed records of every batch. If necessary

you can use them as a reference when making 

improvements in scheduling or correcting mistakes.

• Make sure that an operator is always available

when drying so that any necessary adjustments can 

be made as soon as possible. This will reduce the 

chance of any major issues during the process.

• Always double check your numbers at the end of a

schedule to make sure that you have achieved your 

desired result.

• Once a batch of lumber is dried keep it in a clean,

dry location, away from the elements. Ideally kept 

inside and off the ground. 

• Always stay up to date with the latest information

on lumber drying. Attend trainings and seminars 

whenever possible and keep in contact with your 

local forestry offices

• Every detail is important when drying lumber. Make

sure that you are following operation and safety 

guidelines. Cutting corners can ruin your product, 

damage your unit, or even cause injury.

• If you are unsure about any aspect of operation or

if something seems to be working incorrectly please 

contact 

Wood-Mizer

 as soon as possible. Do not 

continue operation, attempt any adjustment or 

repair to a unit with out consulting a licensed 

professional.

Drying Tips 

Wood-Mizer

KD150 12/22/17

Содержание KD150 Series
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды