Wood-mizer HR250, Руководство по эксплуатации

Страница: 60 / 65

58
MAINTENANCE
Proper maintenance is important to keep the machine in the best
condition. Note that a small problem may lead to poor machine
performance or even cause a serious damage. Therefore, the operator
and maintenance personnel should not neglect the maintenance work.
CAUTION
Disconnect air supply and release compressed
air from the air system before servicing
the machine!
Failure to do so may result in serious injury.
Before performing any maintenance, stored energy such as moving
blades, feed system and air pressure shall be dissipated.
Stop the machine by the normal stopping procedure. Wait until all
rotating parts are completely stop. Disconnect the power supply.
Release compressed air from the air system.
1. NOTICES FOR GENERAL MAINTENANCE.
(1) Keep the machine from direct sun light.
(2) The machine installation location should be dry and well ventilated.
(3) Do not use poor quality lubrication oil.
(4) When the job is finished, clean the machine and turn the power off.
(5) In case abnormal motion occurs, it is necessary to record the
malfunction and troubleshooting result.
(6) It is strongly recommended that only original spare parts be used.