Wood-mizer HR250, Руководство по эксплуатации

Страница: 39 / 65

37
CONNECTING POWER WIRES
CAUTION
It is recommended that a 30mA
Ground Fault Interrupter (GFI) be used.
1. Before connecting the power wires of the machine to your factory’s
power source, make sure the voltage, Hz and phase of the machine
are same as that of your factory’s power source.
2. The power wire connection points are provided at the left bottom
corner in the electrical cabinet.
3. The wires marked with “L1, L2, L3“are power wires.
4. The wire marked with “PE “is a grounding wire, which should
be properly connected to avoid a danger of electrical shock.
5. Once power wires have been connected, check if they are connected
tightly to the correct terminals or not.