Wood-mizer HR250, Руководство по эксплуатации

Страница: 16 / 65

14
INSTALLING MACHINE
HR250_001
IMPORTANT! Before starting to use the resaw, you must meet the
following conditions:
•
Set up the machine on firm and level ground. Secure the sawmill to
the ground to prevent moving during operation.
•
A concrete foundation and anchored bolts are recommended.
•
When your HR250 resaw is used indoors, it must be operated with
a sawdust exhaust system connected.
•
The HR250 resaw must not be used outdoors when it is
raining/snowing. In such a case, the machine must be placed under
a roof or indoors.
•
The machine should work in temperatures of –15
o
C to 40
o
C (5
o
F to
104
o
F) only.
•
The light intensity in the operator’s work-place must be 300 lux
5
.
•
When installing the machine, be sure to leave
proper spaces around the machine to facilitate
material handling.
•
The work-places for two operators of the edger are shown in the
figure below.
5 The light source cannot cause the stroboscopic effect.