Wood-mizer HR250, Руководство по эксплуатации

Страница: 6 / 65

4
SAFETY RULES FOR
HORIZONTAL BAND RESAW
1. Do not attempt to remove any object from the conveyor belt when the
machine is running.
2. The sawblade is very sharp. Care should be taken when replacing
the sawblade.
3. Turn the power off before performing maintenance or servicing.
4. Keep all guards in place before starting the machine.
5. Always keep the sawblade sharp.
6. Before installation of the blade, inspect it for damage and cracks. Use
properly sharpened blades only. Always handle the blade with extreme
caution. Use suitable carrier equipment for transporting the blades.
1. If sawblade breaks, turn the power off immediately. The operator
should stand away from the machine until it comes to a complete
stop.
2. When turning the power on for checking blade tracking, the operator
should stand the one side. This will prevent the danger of blade slip-
out or breakage.
3. Use the proper feed speed according to wood material.
4. Make sure the sawblade is properly tensioned. Excessive tension
may cause blade breakage.
5. Make sure the machine is properly ground to avoid the danger of
electric shock.
6. Before feeding wood into the machine, check if it contains nails or
metallic objects or not.
7. Never clean the blade or blade wheels with a brush or a scraper during
sawmill operation.