Blade Rest Bolt Adjustment
WM doc 1/20/21
4-4
4
4.2
Blade Rest Bolt Adjustment
The sharpener can hold different sizes of blades by adjusting the rest bolts. Use the
upper set of holes for 1” blades, the middle set of holes for 1-1/4” blades, and the bottom
set of holes for 1-1/2” blades.
Adjust the blade rest bolts for different size blades:
1.
Identify the current position of the blade rest bolts and the desired size of blade.
2.
Remove the lock nuts fastened to the blade rest bolts. See Fig. 4-3.
3.
Remove the rest bolts and springs from the current hole locations.
4.
Reposition the rest bolts and springs in the desired hole locations. See Fig. 4-4.
5.
Fasten the lock nuts to the blade rest bolts.
FIG. 4-3
FIG. 4-4
TD-BMS25-17
lock nuts
blade rest bolts
TD-BMS25-18
blade rest bolts
1 inch hole locations
1-1/4 inch hole location
1-1/2 inch hole locations
1-1/4 inch hole location
