Wood-mizer A1.01, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 95 / 148

MAINTENANCE
Safety Devices Inspection
MAINTENANCE 1597doc030112 6-15
6
„
Release the safety button. The moulder motor should be stopped.
„
Try to start the motor without pressing the safety button. The moulder motor should remain
stopped.
„
Press and hold the green safety button. The moulder motor should remain stopped.
3. Inspection of the control circuits with the E-STOP button pressed
„
Press and hold the green safety button;
„
Turn on the moulder motor;
„
Press the E-STOP button located on the left side of the control box. The moulder motor
should be stopped.
„
With the E-STOP button pressed, try to move the moulder head up and down using the
up/down system button and forward/backward using the power feed switch. Both systems
should not start.
4. Cutter housing cover safety switch and its circuit inspection
„
Press and hold the green safety button;
„
Turn on the cutter motor;
„
Open the cutter housing cover;
„
The cutter motor should be stopped;
„
Try to start the motor. The motor should remain stopped;
„
Close the cutter housing cover;
„
The cutter motor should remain stopped until it is restarted with the START button.