Introduction
Customer and Sawmill Identification
Introduction
doc072619
1-5
1
1.4
Customer and Sawmill Identification
Each Wood-Mizer LT15 sawmill is identified with a model number, revision, and serial number
(see the figure below).
The model number includes the base model and the engine/motor configuration. The serial num-
ber contains the month and year of manufacture and a sequence number. The revision number
helps identify the exact design of the equipment. See the figure for a description of the model,
serial, and revision numbers
.
1.5
Warranty
Wood-Mizer
®
LLC
Limited Product Warranty
Wood-Mizer LLC (“Warrantor”), an Indiana corporation with its principal place of business at 8180 West Tenth Street,
Indianapolis, IN 46214-2400 USA, warrants to the purchaser (“Purchaser”) that for the time periods specifically stated
herein and subject to the terms, conditions and limitations stated herein, the equipment manufactured by the Warrantor
will be free from defects in material and workmanship attributable to Warrantor so long as, during the warranty periods
SERIAL NUMBER TAG
MODEL, SERIAL, AND REVISION NUMBER DESCRIPTION.
MFG BY/FABRIQUÉ PAR: WOOD-MIZER PRODUCTS, INC. 8180 W. 10th St. Indianapolis, IN
46214-2400 U.S.A. 317/271-1542 Or 800/553-0182
Model No.:
Serial No.:
Rev.:
LT15 G14S
11170001
A1.00
LT15S
Basic Sawmill I.D.
G14
Configuration
Engine/Motor
1117
Month/Year of
0001
Sequence
Manufacture
Manufacture
A1.
Major Revision Code
00
Code
Minor Revision
Model Number
Serial Number
Revision Number
