1892 1139 - RSX Range of Intelligent Modems User Guide - v7.1 / Nov 2007
15
page of this manual.)
2.
Open the Zip file and run setup.exe, which will install the software for you.
3.
Run the SXn50.EXE program. It will run in a normal window with both mouse and
keyboard support.
At this stage, the main window is displayed as shown in
Figure 13
.
Figure 13
- Programming screen
The screen shows the default settings which are displayed whenever the software is run.
The menu bar at the top lists a number of headings, under which there are usually
additional menu items, representing actions. Below this, there is the Frequency Table.
The leftmost column lists the channel numbers. Ignore the Parallel column. The next
column, TX Frequency, is used to set and display channel frequencies.
Use the
Port Setup > Com Port > COM1
etc. menu selection to select the port to which
your adaptor is connected.
2.2.3
Changing unit settings
Three steps are necessary:
v
Upload information from the unit
v
Edit the information
v
Download information to the unit
