10
Place the rear base coal in the
burner compartment behind
the front coal. It should rest
on the ledge at the back of the
burner compartment and its
rear face should touch the rear
ceramic wall (See Figure 12 &
13).
Install the 9 loose coals as
follows. The smooth surfaces
of the coals should be at the
bottom and back. Select the
two smallest coals and put
them aside until all the other
coals are installed. Place four
of the medium size coals in
the four valleys of the front
coal. Place the left side coal
so that the customer will be
able to see the pilot flame
(Figures 14 & 15).
Place the three remaining
medium size coals behind and
approximately midway
between each of the coals in
the front row (Figures 16 &
17).
Place the two remaining small
coals alongside the main coals
(Figures 18 & 19).
Figure 19 Side Coals in Position
Figure 18 Positioning Side Coals
Figure 17 Second Row of Coals in Position
Figure 16 Positioning Second Row of Coals
Figure 15 Front Row of Coals in Position
Figure 14 Positioning Front Row of Coals
Figure 13 Rear Base Coal in Position
Figure 12 Rear Base Coal Positioning
