INSTALLER’S GUIDE
Page 11
Figure 6 Cable Retention Method
Figure
7
Cable adjustment
4 F I R E B O X I N S T A L L A T I O N
4.1
Cable Retention
•
Cables and
eyebolts are
supplied for the
retention of the
appliance.
Ensure that the
internal fireplace
components are
sufficiently sound
to take the
eyebolts and wall
plugs. These
should be fitted as
shown in figure 6
using the wall
plugs and a No.10
drill. Use only
the fibre wall
plugs supplied (or
similar).
Never use plastic
plugs instead of the fibre
plugs supplied.
•
Assemble one end of the
cable to the top of the fire by
passing it through the small
round hole and locking by
positioning the cable end in the
adjacent slot. Pass the other end
of the cable through the eyebolt
& hole in the lower side of the
appliance and fit adjusters as shown in figure 7.
•
With the adjusters fully screwed in, carefully manoeuvre the appliance into the
fireplace opening. Take up any slack on the cables, and tighten cable nipples into
position.
•
Tighten the appliance into the fireplace opening by turning the adjuster nuts to
compress the sealing foam sufficiently to provide an effective seal. Do not overtighten. If
