Wonderfire Marseille BR622, Руководство по установке

Страница: 10 / 29

10
3.1 Check Ignition Spark
Before attempting to install, it is worth checking that the electronic ignition system
performs satisfactorily.
3.1.1 Fit the battery to the ignition block located below the burner tray at the left
side (see figure 7). The positive (+) terminal is to the right as you insert.
3.1.2 Rotate the control pivot bracket clockwise as far as it will go (see figure 8).
This should close the ignition circuit.
Sparks should be seen tracking from the electrode pin to the thermocouple tip (see
figure 9).
If there are no sparks make the following checks.
a)
Check condition of battery and that it is correctly fitted.
b) Check spark gap between electrode wire and thermocouple tip
(see figure 9).
c)
If a & b are satisfactory, check the ignition circuit and
components - see the servicing section in this manual.
Fig. 9 Pilot Ignition System
Fig. 8 Control Pivot Rotation
Fig. 7 Battery Fitting