SmartStream User’s Guide
35
Adapter Configuration
4.4
Network Settings
“Netw ork Setting” is for you to adjust the various network configurations.
4.4.1
Access Point Mode Setting
SmartStream adapter is also set as a Wi-Fi Access Point in default.
Click “AP Mode” button
to go to “Access Point
Mode Setting” page.
Please click “Enable
AccessPoint Mode” to
set it as an Access
Point.
You can change the IP
types, DHCP status,
and Wi-Fi
configurations here.
Please also refer to
Section 7.1
.
If you are not familiar
w ith these settings,
any changes might
cause the adapter
could not be
connected anymore.
If this is the case, you
can try to reboot it
w ith Ethernet cable to
modify the settings
again. Please refer to
Section 2.2.3.1
and
Section 7.1
.
