50
select 20MHz, the frequency that can be received maximum is 20MHz. For
20/40MHz it can receive both frequencies, and for the 40MHz, it provides
bigger data rate and received the 40MHz frequency. But basically, if the
transmission happened between the AP and the client, both AP and client
can have the negotiation phase about the frequency.
Maximum Output Power
Default: Half
Specify the transmission power. For the higher output power, it can cover
the signal widely and of course may need big power consumption. The Full
output power may need the antenna.
Data Rate
Default: Auto
Select the specific data rate in order to control the transmission rate.
Auto
is preferred rate; the access point will automatically select the highest
available rate to transmit. User may select the low rate when there is no
great demand for transmission speed, for long distance transmission.
Extension
Channel
Protection
Select from the dropdown list option between
CTS-Self or RTS-CTS
to avoid
conflict with other wireless network and to improve the ability of the
device to catch all the wireless transmissions. By activating this function it
may decrease wireless network performance.
Click
Submit
to apply the configuration
