WoMaster WA512G Series Скачать руководство пользователя страница 40

Страница: 40 / 115

3.4.2 WLAN Settings

WLAN Setting page, on this page user may configure the parameters for Wireless LAN Interface includes change

wireless interface modes and all of the related parameters for each operation mode.

There are 2 WLAN interfaces supported in WA512G series. WLAN1 for 2.4GHz and WLAN2 for 5GHz in AP mode can

be configured in the same time. Only one radio can be configured to client mode in the same time.

3.4.2.1 AP mode

The Access Point mode, it establishes a wireless connection, receive from wireless clients and provide connection for

wireless client devices, the client can search and connect to several the access points.

The description of the columns is as below:

TERMS

DESCRIPTION

WLAN Interface

Check the box to disable the WLAN interface and stop all of the wireless

functions.

Operation Mode

Default: AP

Select the Operation Mode for the router. (AP, Wireless Client, WDS-AP

and WDS-Client)

SSID

Default: WR322_1

Input the primary name of the access point.

Broadcast SSID

Default: Enabled.

Pop up window will be displayed to indicate only one radio can be configured in

client mode

Содержание WA512G Series




















































































































Результаты поиска

Содержание WA512G Series

Отзывы:

WoMaster WA512G Series, Руководство пользователя, Страница: 40 / 115

Результаты поиска

Содержание WA512G Series

Отзывы: