WolfVision vSolution Cynap Core, Руководство по интеграции

Страница: 7 / 28

Feb. 20 7 R. Theiner
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: wolfvision@wolfvision.com
www.wolfvision.com
2.7. FTP Client settings
FTP enable Enable or disable FTP client functionality to backup and share
recorded videos and snapshots. Additional features such as
active/passive mode or secure layers (eg. Kerberos etc.) are not
supported.
URL Address of your FTP server in your network, like 192.168.0.100.
(up to 256 characters, no space between the characters)
Username Input the username according your FTP server settings.
Password Input the password according your FTP server settings.
Test it now During the test, Cynap Core will upload a text file onto the FTP-
server (“Cynap Core.txt” without content)
2.8. Proxy settings
To increase security level, use a proxy server to control HTTP and HTTPS traffic from Cynap
Core. Built-in access point and other local services are not controlled. To take effect the new
settings, Cynap Core will reboot automatically.
Proxy enable
Enable / disable proxy service
When enable, all HTTP and HTTPS traffic will be routed to the
your proxy server. Please note, using a Proxy server may block
Skype for Business (optional) functionality.
URL URL of the proxy server in your network, like 104.236.10.17 (or
DNS name up to 256 characters, no space between the
characters). DNS server not required, when using IP
addresses.
Host Port Port, set the used network port to connect to your proxy server.
Authentication Disable / enable Authentication
When enabled, valid user name and password has to be
entered.
Username Username, given by your server.
Password Password, given by your server.
2.9. Security
Admin password
Defines the necessary password for administrator access. This login data is needed to
change the Ethernet Mode, and an existing administrator password.
Using the login data, an administrator can connect to Cynap Core at
any time. The default password is “Password”. Remember to make a
note of any changed passwords!
Login Security
Accessing Cynap Core can be protected by authentication (admin, moderator or PIN).
To prevent unauthorized access of the settings, the admin password needs to be entered
once per session.
Network Security
Accessing Cynap Core can be limited to secure connections only (https). Please note, the
accessing application needs to support SSL / TLS (e.g. the most modern browsers are
supporting HTML5 and SSL /TLS).
Wolfvision support access can be prohibited by disabling SSH.