Feb. 20
4
R. Theiner
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA
Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: [email protected]
www.wolfvision.com
Identity
Login credentials to connect Cynap Core in a protected
network. (802.1x).
Anonymous Identity
The identity to be used on an unencrypted session before
Identity is being validated on an encrypted session.
Authentication Method
Supported are PEAP with MSCHAPv2 and TTLS-PAP
Root Certificate
Only root certificates are supported, load the certificate by
using the Web Interface through the WLAN interface.
Allowed certificates:
•
root certificate (CA) with common file extension .crt
Base-64-coded X.509 encoded DER certificate
•
Privacy Enhanced Mail with common file
extension .perm
Base-64-coded X.509 encoded DER certificate
certificate stored between 2 tags: “---Begin Certificate---“and” --
----End Certificate-----
“
2.2. WLAN settings
– access point
Mode OFF
Disable access point.
Mode Access Point
Enable access point.
Channel
Defines the channel used for wireless communication. For
optimum performance, select a currently unused channel.
SSID Auto
If activated, an automatic SSID is generated using the Cynap
Core serial number
SSID Manual
Defines the network name in plain text for easy identification of
the WLAN network.
Following characters are supported:
-
AaBbCcDdEeFfGgHhIiJjKkLlMmNnOoPpQqRrSsTtUuV
vWwXxYyZz
-
ÄäÖöÜü
-
0123456789
-
_-:$& ()
IP address
Defines the IP address of the access point. Cynap Core acts as
a DHCP server and provides the necessary network settings to
the connected devices.
Subnet mask
Available IP addresses can be limited. A commonly used
subnet mask would be 255.255.255.0
Encryption
Defines encryption for safe network traffic. All connected
devices must use the same algorithm (WPA2).
Transmit Power
Select the desired transmission power to optimize the range.
The maximum power depends on selected channel and region.
Hint:
Cynap Core does not act as router or gateway and only serve
s up a “Cynap Core closed”
network that will not connect to the internet even if the LAN port is connected to the internet.