WolfVision vSolution Cynap Core, Руководство по интеграции

Страница: 5 / 28

Feb. 20 5 R. Theiner
WolfVision GmbH
Oberes Ried 14
A-6833 Klaus / AUSTRIA Tel. +43-5523-52250
Fax +43-5523-52249
E-Mail: wolfvision@wolfvision.com
www.wolfvision.com
2.3. WLAN settings
– infrastructure (Cynap Core acts as client)
Mode Infrastructure Enable Infrastructure, Cynap Core can be connected ac client to
an existing access point.
Band By default, Cynap Core uses the 2.4GHz and 5 GHz frequency
band. The used frequency band can be limited to either 2.4GHz
or 5 GHz. This setting is available in SSID mode only.
Priority Interface Access The higher prioritized interface (value = 1) will be used for
network service first. Ensure that the value is different from the
LAN interface priority.
BSSID On / Off Toggles between SSID and BSSID mode.
With BSSID (Basic Service Set Identification), the used access
point will be fixed and Cynap Core will connect to the defined
access point only. Access point hopping, which is available in
SSID mode (Service Set Identification), will be prevented.
SSID Defines the network name in plain text for easy identification of
the WLAN network. Check existing WLAN infrastructure to get
SSID.
Following characters are supported:
- AaBbCcDdEeFfGgHhIiJjKkLlMmNnOoPpQqRrSsTtUuV
vWwXxYyZz
- ÄäÖöÜü
- 0123456789
- _-:$& ()
BSSID Defines the network name in plain text for easy identification of
the WLAN network. Check existing WLAN infrastructure to get
SSID. This setting is available in SSID mode only.
Subnet mask Available IP addresses can be limited. A commonly used subnet
mask would be 255.255.255.0
Gateway IP Defines the IP address of the server / connection to other
networks (such as the internet). When Cynap Core is directly
connected only to a PC, then enter the IP address of the PC.
Name server 1 / 2 Input the IP address of the preferred Domain Name System
(DNS). This Server translates domain names into corresponding
IP addresses.
Encryption Defines encryption for safe network traffic. All connected units
must use the same algorithm (None, WEP, WPA2, WPA2
Enterprise).
Identity Login credentials to connect Cynap Core in a WPA Enterprise
protected network.
Anonymous Identity The identity to be used on an unencrypted session before
Identity is being validated on an encrypted session.
Authentication Method Supported are PEAP with MSCHAPv2 and TTLS-PAP
Root Certificate Only root certificates are supported, load the certificate by using
the Web Interface through the LAN interface.
Allowed certificates:
•
root certificate (CA) with common file extension .crt
Base-64-coded X.509 encoded DER certificate
•
Privacy Enhanced Mail with common file
extension .perm
Base-64-coded X.509 encoded DER certificate
certificate stored between 2 tags: “---Begin Certificate---“and” ---