2
No.
Name
Description
1
Buttons
Ten buttons on front panel.
The buttons are not defined by default.
Users can configure functions for the buttons through WEB GUI
2
RS232
Connect to a RS232 enabled device for RS232 control.
3
LAN (PoE)
Connect to a network device such as an Ethernet switch, router for LAN control (Web UI &
Telnet).
4
DC 12V
Connect to DC 12V power adapter (Power adapter is not included in the package).
* Factory default setting (The factory default IP address is 192.168.1.254)
* Press the two buttons shown in the above picture at the same for at least until all the backlights of the buttons
blink 3 times, the keypad will be reset to factory defaults.
5.
Specification
Technical
Front panel
10 x Buttons (silicone soft buttons)
Back panel
1 x LAN (RJ45, PoE), 1 x RS232; 1 x DC 12V Power In
Operating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-
20°C to 70°C (
-
4°F to 158°F)
Humidity
10% to 90%, non
-
condensing
ESD Protection
Human
-
body Model, ±8kV (Air
-
gap discharge)/±4kV (Contact discharge)