10
(1)
Click “Edit” to enter the following page.
(2)
Configure the items in the picture above.
•
Command Name
: Set a name for this command.
Note:
The length of each “Command Name” shall not exceed 32 characters and can include letters,
numbers and underscores.
•
HEX String Enable
: Select the command type accordingly to the controlled devices
•
Command:
When the command is string, it will have the end flag for selections, but when use HEX, it will
be no end flag.
(3)
Click “Save” or “Cancel” to save or cancel the configurations above.
If you click “Save”, the page will return to the “Command Settings” tab automatically.
Note:
The “Remove” button in last column allow you to remove the corresponding command of third
-
party
device.
(4)
Repeat steps from (1) to (3) to program other commands.
