Wolfcraft MASTER cut 1500, Перевод оригинальной инструкции по эксплуатации

Страница: 40 / 192

40
INTRODUCTION
• PLEASE NOTE: Do read all safety & other instructions that have come with the Master cut 1500 and with the power tools you use for work.
Failing to observe the safety & other instructions may cause electric shocks, fire and/or severe injuries.
• Do keep the operating instructions for future reference in a safe place.
TECHNICAL DATA
dimensions (put up for use): 780 x 520 x 863 mm (width x depth x height)
dimensions (folded up): 1335 x 520 x 260 mm
worktop: 780 x 500 mm
maximum height of work piece: circular saw bench 60 mm
maximum cutting width with parallel guide: circular saw bench 375 mm
diameter of the clamping holes: 20 mm
load-bearing capacity: 200 kg
weight: 17 kg
t
SYMBOLS AND THEIR MEANING
Do not use the machine for cutting firewood.
Use only hand circular saws with a maximum cutting depth of 70 mm.
Use only saw blades with a maximum diameter of 200 mm
for your hand circular saw.
Set the cutting depth of your hand circular saw before every cut in such a way
that the saw blade does not protrude more than 4 mm from the work piece.
The pictogram indicated refers to the machine plate dimensions
of the circular hand saw (smaller or larger base plate dimensions).
Use only hand circular saws with a riving knife.
Warning against a general danger
Read the instructions!
Goggles must be worn.
Hearing protection must be worn.
Pull the plug.
General information
Dust mask must be worn.
ASSEMBLY TOOLS
1 allen wrench: SW 5
(included in the scope of delivery) 2 screw drivers: PH 1, PH 2 (not
included in the scope of delivery) 3 hexagon wrenches: SW 8, 10, 13
(not included in the scope of delivery)
INTENDED USE
The MASTER cut 1500 is a multifunctional work and machine table. It is suitable for:
• mounting a circular hand saw with riving knife on the machine plate with a max. 200 mm saw blade diameter and max. 70 mm cutting depth.
Do not use saws with base plate dimensions greater than the maximum values indicated (see Fig. 18). It makes the MASTER cut 1500 a stationary
circular saw bench.
• use as a circular saw bench for circular hand saws without a riving knife. Only in conjunction with separate riving knife accessory,
art. no. 6903000 with max. 160 mm saw blade diameter and min. 2.4 mm cutting width.
• use as a circular saw bench for circular hand saws without a riving knife. Only in conjunction with separate riving knife accessory,
art. no. 6903000 with saw blade diameters from min. 161 mm to max. 200 mm, a cutting width from min. 2.4 mm and a max. cutting width
of 66 mm.
• use as a jigsaw table.
• use as a milling table only in conjunction with the parallel milling guide, art. no. 6901000 and for 230 V routers with a maximum rating of 1800 W.
Do not use cutters with a diameter of more than 27 mm!
• Use as a working table for machining workpieces (e.g. drilling, sanding, etc.).
• Observe the manufacturer’s safety instructions for the machines used as well as the safety instructions for the machine table.
• When disposing of the MASTER cut 1500, please observe the local disposal regulations.
The user is liable for any damage or accidents resulting from improper use.
Use only machines with a maximum output of 2760 W.
BDAL 6906_116306906 05.08.13 17:32 Seite 40