23
3064300_201703
SPU-1-200 buffer cylinder made from S 235 JR (St 37-2) steel.
Foil jacket in Wolf silver, no corrosion protection on interior cylinder wall, as
the cylinder is only approved for use in sealed unvented heating systems as
a buffer cylinder
for process water.
Not suitable for drinking water!
The SPU-1-200 is designed for combination with an air/water heat pump or a
brine/water heat pump.
The SPU-1-200 is supplied ready for connection as separating cylinder or as
cylinder in series.
When connected as a separating cylinder, it also acts as a low loss header.
The PU rigid foam insulation ensures minimum radiation and
standby losses.
Please note
SPU-1-200
Standard delivery
SPU-1-200
Packaged in film, fully encased, ready for
connection, incl. boiler drain & fill valve,
adjustable feet, installed sensor well;
installation instructions included
17. Appliance description SPU-1-200
