Wolf SPU-1-200 Скачать руководство пользователя

Страница: 8 / 44

3064300_201703

4. Appliance description CPM-1-70 / CEW-1-200

CEW-1-200 DHW cylinder with internal indirect coil.

Steel cylinder with corrosion protection provided by special enamelled

coating on the inner wall of the cylinder, compliant to DIN 4753. Additional

corrosion protection provided by sacrificial magnesium anode. DHW cylinder

for DHW heating in conjunction with a heat pump.

Suitable for systems to DIN 1988, EN 12828 and DIN 4753.

Dimensions and design are tailored to the Wolf heat pump range, enabling

variable combination.

The DHW cylinder is equipped with a highly efficient bare-tube heat

exchanger with indirect dual coil for convenient DHW heating.

The PU rigid foam insulation ensures minimum radiation and standby heat

losses.

CEW-1-200

The dimensions and design of the buffer module CPM-1-70 are tailored to

the Wolf heat pump range, enabling variable combination.

The CPM-1-70 is supplied ready for connection as a separating cylinder or

cylinder in series. It is designed to provide optimum evaporator defrosting, in

particular for the BWL-1 air/water heat pumps.

When connected as a separating cylinder, it also acts as a low loss header.

A class A high-efficiency heating circuit pump and three-way diverter valve

for DHW heating are already installed inside the casing, including the

necessary pipework, ready for connection. Type CPM-1-70/7 with 7m pump

and type CPM-1-70/8 with 8m pump.

The PU rigid foam insulation ensures minimum radiation and standby heat

losses.

A pre-installed, thermally insulated safety assembly is supplied for on-site

installation.

CPM-1-70

Standard delivery CPM-1-70

Packaged in box, fully encased,

class A high-efficiency pump and

3-way diverter valve with all necessary pipework,

ready to connect, incl. installed boiler drain & fill valve,

adjustable feet, installed sensor well and vent valve;

safety assembly and connecting cable for 3-way diverter valve

and high-efficiency pump provided,

connecting pipe for separating cylinder version with heat pump

return flow included,

installation instructions included.

Standard delivery

CEW-1-200

Packaged in box, fully encased, ready for

connection, incl. installed boiler drain & fill valve,

adjustable feet and installed sensor well;

installation instructions included.

Содержание SPU-1-200













































Результаты поиска

Содержание SPU-1-200

Отзывы:

Похожие инструкции для SPU-1-200

Бренды по названию

Популярные бренды

Wolf SPU-1-200, Руководство по установке

Результаты поиска

Содержание SPU-1-200

Отзывы:

Похожие инструкции для SPU-1-200

Бренды по названию

Популярные бренды