12
|
Wolf Customer Care 800.222.7820
SURFACE OPERATION
French Top
The French top is a graduated cooking surface with the
highest temperature under the center plate. Always use
cookware, do not cook food directly on the surface. For
higher cooking heat, place cookware closer to the center
and for lower heat, closer to the edges. Refer to the illustra-
tion below.
To protect the surface from food splatters and moisture, it is
necessary to “season” the French top prior to use.
Season French top:
1
The French top has a protective coating that must be
removed before use. Use hot water and mild detergent
to remove. Rinse and dry.
2
Turn on ventilation.
3
Push and turn control knob counterclockwise to HI and
heat for 30 minutes. After 30 minutes, turn knob to OFF
and allow to cool.
4
While surface is slightly warm, pour a small amount of
peanut or vegetable oil on a paper towel and spread
evenly.
HIGH
HIGH
HIGH
LOW
LOW
LOW
LOW
MED
MED
CENTER
PLATE HOOK
French top heating zones.
Center plate removal.
FRENCH TOP OPERATION
The stainless steel cover must be removed prior to
operation.
1
Turn on ventilation.
2
Push and turn control knob counterclockwise to HI.
Igniter will begin to click until burner is lit.
3
Allow to preheat for 30 minutes.
CAUTION
Never leave pans on a high heat zone unattended.
Be careful when cooking food in fat or grease; it can
become hot enough to ignite.
FRENCH TOP CARE
•
Clean the entire surface after each use while slightly
warm. Wipe with mild detergent and water. Rinse and
dry.
•
After each use, reapply a small amount of peanut or
vegetable oil on a paper towel and spread evenly.
•
Occasionally, remove seasoning. Apply a small amount
of white vinegar and water to the surface while slightly
warm. Scrub and repeat until excess oil has been
removed. Reapply a small amount of oil for seasoning.
•
The French top burner is located below the center plate.
To remove, use the center plate hook supplied with the
range as shown in the illustration. Never remove the
center plate while cooking.
