31
W O L F W A R M I N G D R A W E R S
P L A N N I N G I N F O R M A T I O N
The Wolf 762 mm warming drawer is shipped
without any decorative drawer front. You must
order a stainless steel drawer front (tubular
handle included) or the integrated front (no
handle) for a custom wood application.
Specifications on the following pages provide
overall dimensions, rough openings and installa-
tion options for Model ICBWWD30 with stainless
steel and integrated drawer fronts. Note that
there are significant differences to the installa-
tion requirements for the integrated drawer front.
An anti-tip block or platform must be installed to
prevent the unit from tipping forward when the
drawer is opened.
The base platform must be able to support
91 kg. This platform must be a minimum of
25 mm above the toe kick to allow for the
16 mm overlap of the warming drawer trim.
Model ICBWWD30 may be installed below a
Wolf built-in oven or an electric or gas cooktop,
provided the warming drawer is fully enclosed,
top and bottom. It may also be installed next to
or above another Model ICBWWD30. Dimensions
will vary according to the specific installation.
S T A I N L E S S S T E E L D R A W E R F R O N T
Wolf recommends using a 838 mm wide cabinet
for the warming drawer with stainless steel
drawer front. A minimum 762 mm wide by
610 mm deep cabinet is required.
I N T E G R A T E D D R A W E R F R O N T
IMPORTANT NOTE:
A minimum 838 mm wide
cabinet is required for the warming drawer with
integrated drawer front. A minimum 610 mm
deep cabinet is required for an overlay applica-
tion and 635 mm deep cabinet for a flush inset
application.
Model ICBWWD30 with integrated drawer front
can accommodate installations with a 762 mm
or 914 mm cooktop. It may also be installed in
combination with a 762 mm single or double
oven or a 914 mm single oven. Dimensions will
vary according to the specific installation.
Keep in mind that the width of the custom panel
for the warming drawer with integrated drawer
front will vary according to the specific installa-
tion. The opening width will remain 749 mm
whether installed in combination with a 762 mm
or 914 mm cooktop or oven.
The decorative wood drawer front panel must
be a minimum of 16 mm thick.
E L E C T R I C A L R E Q U I R E M E N T S
Model ICBWWD30 is CB approved and manufac-
tured for a 220-240 V AC, 50/60 Hz electrical
supply. The service should have its own 15 or
20 amp circuit breaker, and a grounded 3-prong
receptacle should be located within reach of the
power cord and flush with the back wall. Locate
electrical within the shaded area shown in the
installation illustrations on the following pages.
F R O N T P A N E L O P T I O N S
Model ICBWWD30
Classic Stainless
WWDFRONT/S
Integrated
WWDFRONT/I
(accepts wood panel)
Optional drawer front panels are
ordered and shipped as sales
accessories. Stainless steel drawer
front panels include matching tubular
handle.
597 mm
BEHIND FRAME
759 mm
OVERALL WIDTH
229 mm
689 mm
OVERALL DEPTH
260 mm
O V E R A L L D I M E N S I O N S
Model ICBWWD30 with Stainless Steel Drawer Front
A C C E S S O R I E S
Optional accessories
are available
through your Wolf
dealer.
746 mm
OVERALL WIDTH
597 mm
BEHIND FRAME
229 mm
257 mm
Model ICBWWD30 with Integrated Drawer Front
Содержание CT15I/S
Страница 1: ...INTERNATIONAL DESIGN GUIDE ...
Страница 71: ...71 ...
Страница 72: ...WOLF APPLIANCE INC PO BOX 44848 MADISON WI 53744 USA WOLFAPPLIANCE COM 8 1 0 2 9 5 8 2 0 0 7 ...