Wolf CT15I/S, Руководство по конструкции

Страница: 19 / 72

19
W O L F I N T E G R A T E D M O D U L E S
With Wolf‘s integrated modules, you have the
ultimate in customization. You can create your
own design by mixing and matching the various
components within this system. And when you
couple these modules with other cooktops
within the Wolf inventory, you and your client
will truly understand freedom of choice.
Some modules integrate with their larger
counterparts, right down to their low-profile
grates, dual-stacked gas burners, deep spill pan
and illuminated controls. The two-element
electric and dual-stacked sealed burner gas
cooktop modules deliver the same performance
and appearance as the larger electric and gas
cooktops.
Some integrated modules can be installed
together or with a 762 mm or 914 mm cooktop.
When multiple cooktops or modules are installed
side by side, the cut-out dimensions shown in
the illustration below are derived by adding
32 mm additional space for each additional unit,
to give you your total cut-out width.
IMPORTANT NOTE: Refer to specifications on
the following pages for specific installation
requirements and limitations for each integrated
module. Review specific installation instructions
for product-to-product capabilities. Additional
information is provided in the specifications pdf
files on our website, wolfappliance.com
Refer to the following illustration for countertop
cut-out dimensions for the installation of
multiple cooktops or modules.
IMPORTANT NOTE: When multiple cooktops or
modules are installed side by side, each unit
must have its own separate recommended
electrical circuit. When multiple gas cooktops or
modules are installed next to one another, they
can receive their gas supply from a common line.
However, each unit must have its own regulator
installed between the mainline and the cooktop
or module.
W O L F I N T E G R A T E D M O D U L E S
C O U N T E R T O P C U T - O U T D I M E N S I O N S
Installation of Multiple Cooktops or Modules
I N T E G R A T E D M O D U L E S
381 mm Width
Induction Cooktop CT15I/S
Electric Cooktop ICT15E/S
Electric Grill ICBIG15/S
Electric Steamer ICBIS15/S
Electric Fryer ICBIF15/S
Gas Cooktop ICBCT15G/S
Gas Multi-Function
Cooktop
IIM15/S
All integrated modules are available in
the classic stainless steel finish.
IMPORTANT NOTE: Refer to specifica-
tions on the following pages for specific
installation requirements and limitations
for each integrated module. Specifica-
tions for Model ICT15E/S are found on
page 11 and Model ICBCT15G/S specifi-
cations are on page 16.
64 mm
min
FRONT OF COUNTERTOP
489 mm
CUT-OUT
DEPTH
743 mm
TWO MODULES WIDTH
1130 mm
– THREE MODULES WIDTH OR
1124 mm
– 762 mm COOKTOP AND ONE MODULE
1518 mm
– FOUR MODULES WIDTH OR
1511 mm
– 762 mm COOKTOP AND TWO MODULES OR
1276 mm
– 914 mm COOKTOP AND ONE MODULE
356 mm
CUT-OUT
WIDTH
Model ICBIS15/S
Electric Steamer
Model ICBIF15/S
Electric Fryer
Model IIM15/S
Gas Multi-Function
Cooktop
Model ICBIG15/S
Electric Grill
IMPORTANT NOTE: When two or more modules are
installed together, an integrated module filler strip is
recommended. If a Model DD30 downdraft system is
also installed, an integrated module support for down-
draft ventilation is required. Contact your Wolf dealer
for information on these accessory components.
These integrated modules are intended for
indoor use.
Model CT15I/S
Induction Cooktop
Model ICBCT15G/S
Gas Cooktop
Model ICT15E/S
Electric Cooktop