13
A indicates: [0]
Home arm but not alarm
[1]
Home arm and alarm
For example: set defense zone 11 to be Home arm and alarm
Operating method: [
61
]
Ö
[
11
]
Ö
[
1
]
Ö
[
#
]
For example: set defense zone 12 as Home arm but not alarm
Operating method: [
61
]
Ö
[
12
]
Ö
[
0
]
Ö
[
#
]
Artificial Recording
In setup state, use keypad to input [
701
], and then press [
#
] to confirm.
The main unit will emit a beep and the [
] indicator is on, and after
10 seconds countdown, recording starts: record at 30cm away from the
main unit with moderate tone; 10 seconds later, the main unit will make a
beep indicating the recording stops and the recorded voice will replay.
Operating method: [
701
]
Ö
[
#
]
LCD display:
Siren Setting
In setup state, use keypad to input [
75
]; in the operation of arm/ disarm by
remote control, select if the siren sounds or not by [
0/1
] button, and then
press [
#
] to confirm. The main unit will emit a long beep and a voice
prompt “setting completed”.
Operating method: [
75
]
Ö
[
A
]
Ö
[
#
]
A
indicates:
[
0
]
Siren off; [
1
] Siren on; System default: [
0
] Siren off
For example: set siren on when arm/ disarm
Operating method: [
75
]
Ö
[
1
]
Ö
[
#
]
LCD display:
Operation Instructions
System status.There are 4 status as following:
z
Arm:
defense zone 1~99 will alarm when detectors are triggered
z
Home Arm:
in arm status, the defense zone which is set as [Home
14
Arm] will alarm when detectors are triggered.
z
Disarm:
defense zone 1~99 will not alarm when detector triggered
(except 24 hours defense zone)
z
System setup status: In this status, all defense zones will not alarm
when detectors are triggered.
Remote Controller Operation
Users can use remote controller to set system as Out Arm, Home Arm,
Emergency Alarm, Real-time Disarm and etc.
z
Out Arm: Press button
z
Disarm: Press button
z
Home Arm: Press button
z
Emergency Alarm: Press button, system will alarm at once.
Out Arm
It means to guard all around your house while everyone is going out; all
the detectors of the host are always working; when the detector is
triggered by detecting source (anti-theft, fire prevention, gas leak, etc.),
the alarm system will sound the alarm.
Press [
Out Home
] button on keypad, system will make a beep per
second and totally 100 beeps. The
[OUT ARM]
indicator will be on
without flashing. It means Out Arm is set successfully.
Arm Operation: Press [
Out Home
] button
LCD display:
Home Arm
It means, for the safety, while somebody is at home, you need to enable
the peripheral door, window, balcony and boundary detectors of the alarm
system while prevent from triggering the indoor detectors, which may
cause improper warning; then, you shall select Arm at Home, let just part
of the detectors work and disable the other parts.
Main Unit Operation: Press [
At Home
] button on keypad
Remote Control Operation: Press [
] button on remote controller.
LCD display:
