14
G
Spare parts
Troubleshooting
Warranty
Always keep the warranty card completed by the dealer and
the receipt.
WOLF-Garten products are covered by warranty for 24 months
from the date of purchase, whereby this warranty is based on the
available state of technology and the intended purpose and
application of the equipment. The warranty clauses below do not
affect your legal entitlements under consumer protection legislation.
The 24-months warranty is subject to the following conditions:
-
The product has been purchased exclusively for private use.
For commercially used equipment and rental products, the
warranty period is limited to 12 months.
-
The product has been handled according to the instructions in
this manual.
-
The prescribed maintenance intervals have been adhered to.
-
The user has not made any unauthorized modifications to the
equipment.
-
Only original WOLF-Garten spare parts and accessories have
been used.
-
The consumer can present the completed warranty card and/or
a receipt as proof of purchase.
The warranty does not cover normal wear to blades, blade fixtures
such as friction disks, V-belts, toothed belts, idle wheels/tires, air
filters, spark plugs and spark plug connectors, etc. Repair attempts
by the owner shall void any warranty.
Faults or defects that are caused by material or manufacturing
defects must be repaired by one of our contract workshops (chosen
at the discretion of the dealer) or by the manufacturer, if this is more
convenient. Any claims that exceed the warranty cover shall be
rejected. The owner shall not be entitled to demand a replacement.
If there is damage caused by transport, please contact the transport
company, as it is liable for such damage.
Order no.
Item designation
Description
7266 090
F 50 TS
Telescopic handle with carriage - infinitely height adjustable between 85 and 120 cm
7266 095
Accu 50 EM R
Replacement blade for FINESSE 50 R / cutting width 80 mm
7267 095
Accu 50 EM C
Replacement blade for FINESSE 50 C / cutting width 60 mm
7268 095
Accu 50 EM B
Replacement blade for FINESSE 50 B / cutting width 110 mm
7266 077
UK charger
Problem:
Possible causes:
Remedy:
Blades run hot
•
Blade is blunt
•
Replacing the blade
•
too much friction due to insufficient lubrication
•
Use petroleum jelly to grease the plastic ring of the
blades
Motor fails to start
•
Battery flat
•
Recharge battery
•
Battery defective
•
Take the unit to the WOLF-Garten service workshop
Problems when
charging the battery
•
Battery or charger defective
•
Take the unit to the WOLF-Garten service workshop
Jerky run, machine
heavily vibrating
•
Blade damaged
•
Replacing the blade
If in doubt, bring your tool to a WOLF-Garten service workshop.
1
Switch off the battery-powered shears before examining them or working on the blade.
All repairs under warranty are carried out by our authorized customer service workshops or at the following workshops of the
manufacturer:
G
WOLFGarden Ltd.
Crown BusinessPark
Tredegar
Gwent, NP22 4EF
Tel. : ++ 44 / 14 95 30 66 00
Fax : ++ 44 / 14 95 30 33 44
E-mail: [email protected]
0054641.book Seite 14 Mittwoch, 8. April 2009 3:15 15
