Wolf Garten Compact plus 32 E, Оригинальная инструкция по эксплуатации

Страница: 14 / 110

14
G
Mulch
„Mulching“ is a process in which the grass is finely chopped by a
special cutting system and then deposited on the ground. The re-
sult is that the grass does not have to be collected and disposed
of. „Mulching“ also prevents the lawn from drying out.
3
Instructions for mulching
We recommend:
z
Depending on the growth of grass, mulch 1 – 2 x per
week
z
The grass should not be too high nor too wet!
z
Go slow while mulching
z
Take care that the blade channels do overlap.
z
Do not cut grass more than 20 mm.
3
Note:
Mulching is not advisable in case of moss-affected or
entangled grass, because the cut material stays on the
moss surface and/or entanglement and thus cannot be
absorbed by the ground.
z
Regularly scarify and manure the lawn.
Activating the mulch function
1
Attention! Rotary cutter blade
Undertake adjustments on the equipment only after the
motor is switched off and the cutting tool has come to a
standstill.
z
Do not start the motor until your feet are at a safe distan-
ce from the cutting tool.
1. Remove the grass collecting bag.
2. Set the switch to „MULCH“.
3. Start the motor.
Maintenance
General
1
Attention! Rotary cutter blade
Before all maintenance and cleaning work:
z
pull out the power plug.
z
Do not touch running blades.
Cleaning
z
Clean mower thoroughly after each mowing with cloth or
brush.
z
Clean the mulch flap at regular intervals with a small
broom
.
z
Do not spray with water.
Winter Storage
z
Clean mower thoroughly before storing away.
z
Have your mower thoroughly checked once a year by an ap-
proved Service Centre.
z
Do not store it in a wet or humid place.
Changing blades
z
For all works on blades, coupling and cutter bars, first of all,
pull out the power plug and wear protective gloves.
1
Attention!
An unbalance can develop after regrinding of the blade.
z
Always regrind the blades in a specialist workshop,
because an unbalance check should be undertaken
according to the safety regulations.
z
Always change blades in a specialist workshop. A torque
spanner of 10 mm is mandatorily required.
Fastening torque of the screws: 6 - 7 N-m
.
Spare parts
S
V
W
W
Item number Order description Product information
4904 031 Grass catcher (32/34)
4907 031 Grass catcher (37)
4913 095 Vi 32 FM Replacement blade 32 cm
4904 096 Vi 34 FM Replacement blade 34 cm
4907 096 Vi 37 FM Replacement blade 37 cm