Wolf Garten A 320 E, Руководство пользователя

Страница: 25 / 180

25
A320E
Troubleshooting
EN
Troubleshooting
WARNING !
Risk of injuries or material damage
¾
In case of doubt always consult a specialist workshop.
¾
Before any inspection or any work on the mower blade, switch the lawnmower off and pull out
the plug.
Problem Possible cause Remedy
Uneven running, severe
vibration of the lawnmower.
The mower blade is damaged.
Take your mower to a specialist
workshop.
The mower blade has come loose from its
attachment.
Motor does not run.
The fuse at the mains connection has blown/
is defective. Contact an electrician to arrange its
repair.
Procedure in the event of cable damage:
Attention electric shock!
The fuse/circuit breaker will not always blow/
trip if the cable is cut through or damaged.
Do not touch the cable before the mains plug
has been pulled out of the socket.
Damaged cables must be repaired by a
qualified electrician or workshop.
Repair of
the cable using insulating tape is forbid-
den .
Take your mower to a specialist
workshop.
Poor mowing/grass collec-
tion performance.
The mower blade is blunt.
Take your mower to a specialist
workshop.
The grass collector is clogged.
Follow the instructions in the section
“Adjusting the cutting height”.
The cutting height is not adjusted.
Follow the instructions in the section
“Adjusting the cutting height”.
Spare parts and accessories
Order no . Part code Part description
WG742-04355 Vi 32 D Mower blade 32 cm
Warranty
The warranty conditions of our local company or
importer apply in all countries. Under the terms of
the warranty we will repair faults on your lawnmower
free of charge, insofar as material or manufacturing
defects are the cause. To make a claim under war-
ranty please contact your reseller or your nearest
branch.
CE Declaration of Conformity
Further details about the lawnmower are
contained on the separately enclosed CE
Declaration of Conformity, which forms part
of this instruction manual.
Environmentally-friendly disposal
Do not throw power tools away with your
domestic waste!
According to European Directive 2012/19/
EU on Waste Electrical and Electronic
Equipment and its implementation in
national law, irreparable or non-serviceable power
tools must be collected separately and routed into
an environmentally compatible recycling chain.