19
A320E
Safety information
EN
Safety information
¾
Do not use any mower whose switch is
defective and which can no longer be
switched on or off .
It must be repaired by a
qualified expert or workshop.
¾
Remove any adjustment tools or spanners
before switching the mower on .
Injuries
could be caused by a tool or spanner that is left
attached to the rotating mower blade.
¾
Check the connection cable and any
extension cable that may be connected to the
mower for damage and aging (brittleness) .
Only use the cable if it is free from defects.
Damaged cables must be repaired by a qualified
electrician or workshop.
¾
Never use a lawnmower with damaged or
missing safety equipment such as a deflector
flap and / or grass collector, casing, etc.
They
must be repaired or replaced by a qualified expert
or workshop.
¾
Check the deflector flap for brittleness and
correct seating .
¾
Before mowing, make sure that the lawn is
free from branches, stones, wire etc . and look
out for such objects the whole time when
mowing .
¾
Regularly check the grass collector for wear
and to ensure it is in good working order .
¾
Visually inspect the mower blade to check
that it is not blunt, damage or deformed .
Tips for use
¾
Adopt a normal posture . Ensure you are
standing securely and that you maintain your
balance at all times .
Do not run, rather walk
forwards at a steady pace. This will ensure that
you can maintain better control of the lawnmower
if unexpected situations occur.
¾
Do not use the lawnmower in an explosive
environment, where there are inflammable
liquids, gases or dusts .
The lawnmower may
create sparks, which could ignite the dust or
vapours.
¾
Do not tilt the lawnmower when starting-up
or switching the motor on unless the mower
must be raised while doing so . In this case
only tip the lawnmower as far as is absolutely
necessary and only lift the side that is away
from the user .
¾
Maintain the safety distance that is defined by
the handle .
¾
Under the following circumstances, switch
the lawnmower off and pull out the plug . Make
sure that all moving parts have come to a
complete standstill:
•
If leaving the lawnmower unattended;
•
When clearing a blocked mower blade;
•
If checking, cleaning or working on the lawn-
mower;
•
If you have mowed over a foreign body (check
whether lawnmower or mower blade have been
damaged);
•
If the lawnmower is vibrating strongly because
it is out of balance;
•
If the power cable is damaged during use.
¾
Take extra care if you are mowing backwards
and pulling the lawnmower towards you .
¾
Switch the lawnmower off, if you need to tilt
or transport it, e .g . between lawns or over
paths .
¾
Do not stand in front of the grass ejector
opening .
Otherwise you could be caught up in
the mower blade or hit by the ejected grass.
¾
Never leave the lawnmower unattended
during breaks and store it in a secure
location .
¾
Before lifting or carrying the lawnmower
away, switch the motor off, pull out the power
plug and wait until the mower blade has come
to a standstill .
¾
Only adjust the cutting height with the
motor switched off and the mower blade at a
standstill .
¾
Before removing the grass collector, switch
the motor off and wait until the mower blade
comes to a standstill .
After emptying the grass
collector, attach it carefully and make sure that it
is securely fixed to the lawnmower.
¾
Never open the deflector flap if the motor is
still running .
Содержание A 320 E
