55
SDC-10
A
B
Off
On
Off
On
Off
The video images are enlarged [stretched] in the vertical direction of the panel resolution. This setting is used when
one uses the anamorphic lens to enlarge them in the horizontal direction.
(*) Anamorphic modes cannot be set when there is a 3D signal input.
If a 3D signal is fed in whenever the Anamorphic modes are set to A or B, the Anamorphic modes are automatically turned Off.
Settings: A, B, Off
[Off]
Video with an aspect ratio of 2.35:1 is enlarged in the vertical direction of the panel resolution and projected.
Video with an aspect ratio of 16:9 are displayed by reducing them in the horizontal direction, without changing their size in
the vertical direction.
Used when watching video images other than those with a 2.35:1 aspect ratio while using an anamorphic lens. 2.35:1 video images
are projected without any changes. (Black bands appear on all sides)
This control may correct for white balance errors, when determined to occur from the non-uniform reflective properties of
the projection screen.
Please adjust to your preference.
Adjusts black level when used indoors.
Settings: 0 to 10
[0]
Use this remote button to adjust focus, zoom and shift.
You can also turn the test pattern display ON and OFF and then save your lens position settings during adjustment.
Use the UP/DOWN keys to select an item to adjust.
Press the [BACK] key to return to the previous screen.
This selection adjusts the image focus.
This selection adjusts the image overall size.
This selection enables you to move the image UP/DOWN/LEFT or RIGHT, using the center rosette.
A test pattern for your use when adjusting focus, zoom and shift.
During adjustment, the test pattern is displayed.
During adjustment, the external input signal is displayed [without the test pattern].
This locks out or enables use of the lens controls.
This effectively locks out the “LENS” functions on the remote control.
This enables the “LENS” functions on the remote control.
This menu function [and via direct IR remote control button] recalls previously saved lens adjustment memories.
This is used to toggle between the primary lens VariScope™ aspect ratio memories, i.e. 1.78:1, 1.85:1, 2.35:1 and so forth
[as made available by your custom installer].
This saves all focus, zoom and shift settings work into one of three available memories [the user memories can be renamed].
Edit and change the lens memory / aspect ratio names.
(*) Number of characters is limited to 10, and may include capital and lower case letters, numbers and symbols.
Select the user memory name you wish to edit.
Press the [OK] button on the main unit or the remote control to confirm and enter the edit mode.
(*) A “-“ is displayed if the information is not saved.
(*) Press the [BACK] key on the main unit or remote control at anytime to exit the edit mode. Doing this will delete your modifications.
This highlights the edit area. The cursor will move automatically as you enter characters.
Move the cursor using the [UP], [DOWN], [LEFT] and [RIGHT] keys on the projector or on the remote control.
Select the letter to enter and press the [OK] button.
Make the next letter, number or symbol selection and press [OK].
Use this to delete a character. Move the select cursor to the desired location and press the [OK] button.
This will delete the character in the Name field.
Anamorphic
Screen Adjust
Black Level
Focus
Zoom
Shift
Image Pattern
Lock
Lens Memory Save
Lens Memory
Name Edit
Memory 1, 2 or 3
Input Cursor
Select Cursor
Clear
VariScope™
Lens Memory Select
3-1
Lens Control
Содержание SDC-10
Страница 1: ...SDC 10 ...
