SDC-10
1080p D-IL A
®
3D Front Projector
User’s Manual
12
POWER CONNECTION
For USA and Canada only Use only the following power cord.
The power supply voltage rating of this product is AC110V – AC240V. Use only the power cord designated by our dealer to ensure
Safety and EMC. Ensure that the power cable used for the projector is the correct type for the AC outlet in your country. Consult
your product dealer.
For United Kingdom
For European continent countries
WARNING! Do not cut off the main plug from this equipment.
If the plug as fitted is not suitable for the AC outlets in your
home or the cable is too short to reach an outlet, then obtain an appropriate safety-approved extension cord or adapter, or consult
with your dealer. If the main plug is cut off or damaged, dispose of the entire cord immediately. If a new cord or plug is to be
used, then follow the instruction given herein or consult your dealer.
WARNING!
THIS APPARATUS MUST BE GROUNDED.
IMPORTANT (Europe only):
The wire in the cord on this product are colored in accordance with the following pattern:
Green-and-yellow –
Earth
, Blue –
Neutral
, Brown –
Live
As these colors may not correspond with the colored terminals in your plug, proceed as follows:
The wire which is colored
green-and-yellow must be connected to the terminal which is marked M with the letter E or the safety earth or colored green or
green-and-yellow. The wire which is colored blue must be connected to the terminal which is marked with the letter N or black
colored. The wire which is colored brown must beconnected to the terminal which is marked with the letter L or red colored.
POWER CONNECTION (United Kingdom only) HOW TO REPLACE THE FUSE:
When replacing the fuse, be sure to use only a correctly rated approved type, re-fit the fuse cover.
IF IN DOUBT — CONSULT A COMPETENT ELECTRICIAN
.
Open the fuse compartment with the blade screwdriver, and replace the fuse.
(* An example is shown in the illustration at right.)
Information for Disposal of Old Equipment and Batteries (European Union only)
These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to
dispose of the product or batteries, please consider the collection systems or facilities for appropriate recycling.
Note:
The sign Pb below the symbol for batteries indicates that this battery contains lead.
Products
Battery
Fuse
Содержание SDC-10
Страница 1: ...SDC 10 ...