51
SDC-10
Correction Value
Gamma
Adjustment
White
Red
Green
Blue
Reset
Emphasizes the outline sharpness of all images. Adjust to your preference.
Values: 0 to 50 (sharper)
This control makes minute details of the image “stand out.” Adjust to your preference.
Values: 0 to 50 (strong)
[1] Create custom gamma curves and save in the Custom 1, 2, and 3 memory settings.
Please adjust to your preference.
(*) Initial values of Custom 1, 2, and 3 are the same as for “Normal”.
(*) Please refer to the figure at the bottom for adjustment.
(*) It is recommended that you read “Gamma Curve” (page reference: 56) for hints about adjustment.
You can choose to add the underlying gamma curve adjustment.
(*) Can choose any setting, as the default gamma curve will always appear linear. Settings: Normal, A, B, C, D
(brightens in particular dark to intermediate parts) 1.8 to 2.6 (darkens in particular dark to intermediate parts)
in the range of values with increments of 0.1
[Normal]
The gamma curve for “green” is being displayed as being representative. If “white”, “red,” “green” or “blue” are selected,
the corresponding color curves are displayed.
Place the cursor on a gamma curve with 12 points with the buttons for left and right, and then use the buttons for up and
down buttons to move those points up or down.
Red, green and blue can be adjusted at the same time.
Adjust only the gamma curve for red.
Adjust only the gamma curve for green.
Adjust only the gamma curve for blue.
The same data as for the "Normal" modes are used when resetting custom gamma.
(*) When you exit the adjustment menu of Custom Gamma, please save the adjustment values.
You can return to the original data, which should be saved.
Sharpness
Detail Enhance
Custom 1~3
1-2-1
Sharpness
1-2-2
Custom Gamma
Custom Gamma
Correction Value
White
Red
Green
Blue
Reset
1023
512
50
100(%)
Custom1
Custom2
Custom3
0
Picture Adjust
Exit
MENU
BACK
Back
Select
Operate
Normal
>>
Gradation diagram
corresponding to the
gamma curve.
Gamma curve
Gradation at the
selected point.
(*)
Содержание SDC-10
Страница 1: ...SDC 10 ...