Manual_S5_Airplus_2015_04_20
Page 9 / 68
©
Wodtke GmbH - Tübingen. All Rights and Changes Reserved.Printed 04/2015
Part No. 950 976
3.9
Pellet Supply /
Pellet Storage
Wood pellets are delivered in an absolutely dry
state. In order to maintain the quality of the pellets,
the pellets must be stored dry and free of contam-
inants. Our units are normally (more than 90%)
loaded conveniently by hand using bagged goods
(15 kg bag). In the case of 3 t of pellet consump-
tion per year, this makes 200 bags over the course
of a year; that is, only 1/2 bag per day on average.
Pellets can also be delivered by tank trucks and
blown into a warehouse / silo in the case of greater
annual consumption. For storage of pellets and
transportation of pellets from the warehouse to the
furnace, wodtke offers corresponding conveyance
technology systems (see wodtke price list).
The wodtke
"Vario" pellet gate
is available for
connection to an individually constructed, external
pellet storage facility (constructed by the cus-
tomer).
We recommend feeding the pellets by
gravity, by positioning the pellet stock above
the furnace
. The advantages of this are lower
construction costs and simple, reliable and sturdy
design without additional drive units and motors.
With the "Vario," the pellet connection can also be
closed and the furnace can be separated from the
storage facility for maintenance purposes.
If pellet conveyance technology is connected to
the wodtke Pellet-Primärofens of the PO 03 se-
ries, room air independent operation is no longer
possible, since by design, fabric silos and convey-
ance systems cannot be sealed. In that case, a
wodtke DS01 differential pressure controller must
be installed for monitoring.
3.10 Voltage Supply
Required voltage supply: 230 VAC / 50 or 60 Hz.
Voltage ranges from 195 V to 255 V are permitted.
All furnaces have automatic frequency recognition
and
change-over
from
50
Hz
to
60 Hz networks (e.g. Japan).
4
ID Plate and Serial Number
The ID plate and the serial number of the furnace
are located in the pellet drawer (inside; open pellet
drawer with turning handle on the rear side of the
furnace and swing open the pellet drawer). Please
record the serial number of your furnace here and
be sure to keep this document. If you should re-
quire spare parts, you must always specify the se-
rial number of your furnace so that we can supply
you with the correct parts.
Please enter the
serial number
from the pellet
drawer (inside) here and keep this document:
Ser. No.:________________
Fig. 1:
ID Plate
