Wodaplug.com OLT CLI User Manual
www.wodaplug.com
49
4.3.8.1.
Set Port’s RX Frames Types
Command
Grammar
epon(ge1)#
acc-frame <
type
>
Function
Set switch control module port’s RX packet frame types
<type>
Packet frame types :
tagged:receive tagged packet only
untagged: receive untagged packet only
all:receive all types of packet frame
【
Remark
】
Our OTL system can’t set untagged type mode yet .
4.3.8.2.
Set Port’s Default Priority Level
Command
Grammar
epon(ge1)#
def-pri <
privalue
>
Function
Set switch control module’s default priority level ,similar to
PVID .When port received untagged vlan packet ,the packet is set by
priority .The priority level is port’s default 802.1P priority .The data
packet will enter different priority queue to receive different service
according to corresponding priority level and flow category .
< privalue>
Set configured port’s priority level value from 0 to 7
4.3.8.3.
Configure Port’s Duplex Mode
Command
Grammar
epon(ge1)#
duplex <
duplex
>
Function
Set switch control module port’s duplex mode
< duplex>
full:full duplex mode
half:half duplex mode
auto:auto-negotiation mode
