Wodaplug.com OLT CLI User Manual
www.wodaplug.com
46
4.3.6.5.5.
Set RSTP Port’s Priority Level
Command
Grammar
epon(rstp)#
rstp port
<portlist>
priority
<priority>
Function
Configure RSTP port’s priority level. The port with priority will change
to forward port when delivering the same bridge ID and having the
same link cost .
<portlist>
Port list ,any one from ge1 to ge4.
<priority>
Configure appointed RSTP port’s priority level with integer value valid
from 1 to 240 ,step length 16 ,meaning 16xN(n is from 0 to 15 ) .
4.3.6.6.
Show RSTP Configuration Information
Command
Grammar
epon(rstp)#
show
Function
Show RSTP bridge and port’s configuration information
【
Example
】
1.show switch control module’s RSTP configuration information :
epon(rstp)#show
RSTP Bridge Status:
RSTP Setting :Disable
Bridge ID [PRI-MAC] :32768-e0:67:b3:00:63:07
Bridge Hello Time :2 sec
Bridge Max Age :20 sec
Bridge Forward Delay :15 sec
Transmit Hold Count :6
Root Bridge ID :0-00:00:00:00:00:00
Root Path Cost :0
RSTP Port Status:
PID Mode Pri PathCost EdgeCfg OperEdge P2PCfg OperP2P State
1 RSTP 128 20000 Auto Non-Edge Auto P2P LinkDown
2 RSTP 128 20000 Auto Non-Edge Auto P2P LinkDown
3 RSTP 128 20000 Auto Non-Edge Auto P2P LinkDown
4 RSTP 128 20000 Auto Non-Edge Auto P2P LinkDown
