Wodaplug.com OLT CLI User Manual
www.wodaplug.com
45
4.3.6.5.2.
Set RSTP Port’s Protocol Version Checkout
Command
Grammar
epon(rstp)#
port
<portlist>
mcheck
Function
Configure RSTP port’s protocol version check out .When executing
this command ,the appointed port’s mode is force to be the same as
next received BPDU packet version.If the next packet is STP BPDU
packet ,the port’s mode is STP .If it’s RSTP BPDU packet ,the port’s
mode is RSTP. RSTP port’s protocol version is a booting command, not
available to preserve the attributed value continually .
<portlist>
Appointed port list ,any one from ge1 to ge4 .
4.3.6.5.3.
Set RSTP Port’s Point-to-Point Attribution
Command
Grammar
epon(rstp)#
port
<portlist>
p2pcfg
<p2p>
Function
Configure RSTP port’s point to point index . whether the appointed
port is point-to-point port.Point to point port could allow to switch
to forward status rapidly .Non-point to point port needs to go
through step of discarding-learning-forwarding first before switching
to forward status .
<portlist>
Port list from ge1 to ge4
<p2p>
Appointed RSTP port index with bytes value such as p2p,shared and
auto .
4.3.6.5.4.
Set RSTP Port’s Link Cost
Command
Grammar
epon(rstp)#
port
<portlist>
path-cost
<pathcost>
Function
Configure RSTP port’s link cost .It’s used to calculate the root link’s
cost .The port with the lowest root link cost will change to forward
port when delivering the same bridge ID .
<portlist>
Appointed port list, any one from ge1 to ge4.
<pathcost>
Appointed RSTP port’s link cost with integer value from 1 to
200000000.
