WMF 10, Руководство пользователя

Страница: 79 / 212

Operation
20
With the Teach-In function, you can change the cup volumes according to your personal wishes. The
milk foam and coffee proportions can be selected up to approx. 250 ml. independently of one another.
For latte macchiato, you can use a glass 14 cm in height when you remove the drip tray with the tray
grid.
>
Place a cup of your individually preferred size centrally below the spouts for coffee and milk foam.
>
Wait until the illuminated cross glows white.
>
Keep the button pressed for that beverage pressed whose cup volume you wish to change
(cappuccino or latte macchiato).
The illuminated cross glows red while the steam generator heats up. After 3 seconds, the illuminated
cross flashes red-white to indicate that the Teach-In mode has been activated.
>
Release the cup and keep an eye on the filling level.
The preparation of the milk foam starts automatically as soon as the steam generator is ready. As long
as the Teach-In mode is active, the illuminated cross flashes white.
>
Press the button as soon as the desired quantity of milk foam has been reached.
Coffee preparation starts automatically.
>
Press the button once again as soon as the desired quantity of coffee has been reached.
The illuminated cross flashes white 3 times to confirm successful programming.
If you wish to set the milk foam proportion and/or the coffee proportion to the maximum value, do not
press the button again. Dispensing stops automatically at the maximum quantity. The illuminated cross
then flashes white 3 times to confirm successful programming.
The program is now set until it is changed or reset to the default value.
Teach-In-
programming
GB